TorkCraft – Dry Use Diamond Polishing Pad
Grit: #150
Application:
The Tork Craft Dry use diamond polish pads 100mm is for marble and granite,
choose from 50-3000 Grit. Optimized for polishing marble, granite and stone.
Recommended to use polishing machine, Tork Craft option POL 06
- Ideal for both contractors and DIY users.
- Suitable for wet use.
- Hook & Loop back for fast pad change.
- Recommended Tork Craft backing pads SPC00117 100mm x M14 or SPC00118
100mm x 5/8UNC - Grit sizes available 50 / 150 / 300 / 500 / 1000 / 2000 / 3000
Guide for usage
- Wear an apron, a gauze mask and safety glasses. Connect a backing pad to
the polisher, and attach the polishing pad to the backing pad. Set the speed
at 3000 – 4000 RPM and start the polishing process. - Moving two passes across and one pass up and down is a good technique.
Make sure all prior scratches are removed before moving onto a higher grit.
Reapeat the same process using all 7 pads to complete the polishing process.
Polish from grit 50 – 3000 respectively. Do not skip. - If you want to achieve the best polishing results on granite or other
natural stones, use Buff Pad as the last step. Wet the workpiece and run the
Buff pad semi-wet with very low water. When the water is consumed, the
process is complete. Repeat as necessary to improve the look and achieve the
mirror effect result.
Steps by pad:
| Pad | Grit |
| 1. Grey | 50 |
| 2. Yellow | 150 |
| 3. Orange | 300 |
| 4. Red | 500 |
| 5. Dark Green | 1000 |
| 6. Green | 2000 |
| 7. Pink | 3000 |
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
